Miter Saw Compact 7-1/4-in 10-Amp Single Bevel Sliding Laser Compound Molding

Miter Saw Compact 7-1/4-in 10-Amp Single Bevel Sliding Laser Compound Molding
Miter Saw Compact 7-1/4-in 10-Amp Single Bevel Sliding Laser Compound Molding
Miter Saw Compact 7-1/4-in 10-Amp Single Bevel Sliding Laser Compound Molding
Miter Saw Compact 7-1/4-in 10-Amp Single Bevel Sliding Laser Compound Molding
Miter Saw Compact 7-1/4-in 10-Amp Single Bevel Sliding Laser Compound Molding
Miter Saw Compact 7-1/4-in 10-Amp Single Bevel Sliding Laser Compound Molding
Miter Saw Compact 7-1/4-in 10-Amp Single Bevel Sliding Laser Compound Molding
Miter Saw Compact 7-1/4-in 10-Amp Single Bevel Sliding Laser Compound Molding
Miter Saw Compact 7-1/4-in 10-Amp Single Bevel Sliding Laser Compound Molding
Miter Saw Compact 7-1/4-in 10-Amp Single Bevel Sliding Laser Compound Molding

Miter Saw Compact 7-1/4-in 10-Amp Single Bevel Sliding Laser Compound Molding
Innovative compact rail design reduces work space required for operation of saw. Includes a 40T carbide tipped saw blade. Maximum crosscut up to 2-in x 8-in (nominal) at 90 degrees and 2-in x 6-in at 45, idea for molding and framing cuts.

Lightweight (under 23 lbs) for easy transport from storage to work location. Miter cuts up to 50 degrees left and right with 9 positive stops at the most used degrees.

Tool-less adjustable upfront mounted laser guide system projects accurate pre-cutting line for precise alignment. Powerful 10.0 Amp ball bearing motor, delivers up to 5,000 RPM for accurate cuts. Large, die-cast aluminum base and table for increased work support.

Bevel cutting up to 47 degrees to the left, positive stops at 0 and 45 degrees. Dual slide rail system with linear bearings allows for smooth and accurate operation. Tall, die-cast aluminum fence gives support during setup and cutting.

Depth of Cut at 90 Degrees (Inches). Depth of Cut at 45 Degrees (Inches).

Maximum Miter Cut - Left (Degrees). Maximum Miter Cut - Right (Degrees). CA Residents: Prop 65 Warning(s). As a professional furniture and cabinet maker I was tired of carrying a heavy miter saw to a job site for just a few cuts. I had looked at this saw for some time but wasn't sure of it capabilities. So finally decided to give one a try. While it appears to be a newer version I think it's an improvement over what I used to look over on the displays. Out of the box it was close to "true" but was very easy to set and I'm surprised at the accuracy. I added a my own per-scission fence and bed plus a fine cut blade (I didn't try the stock blade so no review on that but it does appear to be a good blade).

Bought this to help cut with my laminate flooring project. My friend has a bigger one and it was great, so I decided to get the smaller model due to I will only have small jobs like the flooring per say. Cheaper then a laminate cutter and I can use it for other small projects as well.

I like it and for the options it has. Got this last week to do some projects around the house.

I built some outdoor steps with it. The cuts were precise and smooth.

The laser is easy to adjust. However, the laser wasn't bright enough to see with the garage door open and the sun shining in. With the garage door closed, it was fine. The blade cut smoothly and quickly. The slider was was precise and smooth.

The dust collector worked great. Great little saw for the price. It won't do 4 inch thick lumber, but for anything less is great. It work perfect for small project and also it works great for finishing details. What a Dandy little saw this is! It is exactly what I wanted! I already have a 12 chop saw that is great to keep in my shop but too heavy and bulky to drag around (even with the fancy folding stand it is on). I wanted a saw that I could throw in the back of the truck easily and take with me. I bought a non-sliding little Delta chopsaw but the capacity was terrible. This little Kobalt excels because of the slide. I did knock off a star because there is no decent carry handle for one-handed carry. Not a big deal but would've made a big difference. The laser is icing on the cake AND it is easily adjustable!

Local pickups NOT available at this time. We try our very best to make sure every customer is completely satisfied. If there's a problem, message us!

We're happy to help. The item "Miter Saw Compact 7-1/4-in 10-Amp Single Bevel Sliding Laser Compound Molding" is in sale since Wednesday, June 26, 2019.

This item is in the category "Home & Garden\Tools & Workshop Equipment\Power Tools\Power Saws\Miter Saws". The seller is "ezliving759" and is located in Multiple Locations. This item can be shipped to United States.
Miter Saw Compact 7-1/4-in 10-Amp Single Bevel Sliding Laser Compound Molding